PET HEATER
This is the PET HEATER. A new product to make your pet’s life more confortable in the winter. Here in Brazil is not so cold like others countries. The coldest place here is in the south. But even in the southeast sometimes we had unusual low temperatures. And the pets suffer because of the low temperature. I realized that dogs sometimes shakes inside their houses made of wood. With this product is possible to control the temperature inside the dog’s house. Although the high security of the PET HEATER, it’s recommend to install outside the dog’s house. The best place is at back side. And with two pipes is possible to make the air circulate. I’ve mentioned the security. The PET HEATER has a fuse, a temperature sensor and a fan sensor. If the fan fails or the temperature is above a programmed level the PET HEATER turns off.
There are two operation modes: manual and automatic. In the manual mode the circuit doesn’t control the temperature. It’s possible to set the fan speed and the heat power. In the automatic mode is possible to set the temperature and the fan speed. So the PET HEATER controls the temperature inside the dog’s house. But the temperature showed is always above the temperature inside the house, because the sensor is inside of the box. But it’s possible to make a relationship with the value showed and the temperature that is confortable for the pet.
Another advantage is the voltage range. The PET HEATER can operate from 100V to 240Vac, with an automatic voltage sensor. It’s not necessary to know the voltage in the wall outlet. The lcd’s led can be turned off and there is a timer to turn off the PET HEATER. The power consumption is around 200W, but it depends on many factors, for example, the size and the material of the house and the temperature outside. Later I’ll upload more photos and I'll make a video with the PET HEATER working.
